The Easy Way to Keep Fish “Under Pressure”

Carp habits change as soon as we start to try to catch him. The higher the voltage of fishing, the more intense it is, the faster the fish learns to recognize your bait and installation, and the harder it will be to succeed with basic tactics. Carp learn to identify certain objects, but, fortunately, we are able to predict his behavior, which should give us a step ahead.

Ideally, the fish will come to your spot will suck all of it, including your bait and seconds later off panicked.

As I said, this is the perfect scenario, but after carp was hooked up several times, most of them will find a way to avoid this after you study the eating spot.

Let’s look closer than the standard situation. I think most of you will recognize this installation as a standard method in most cases, when fishing-hook normal, 15 to 25 cm occasion and a 120-gram weight. Carp sucks the hook and bait you, and when the occasion stretch, fish detected by the weight of lead. Assume that this is happening for the first time this fish. Then she will panic, which will increase the tension on your line through the main line and put your reel, then the fish will be hooked perfectly. As fishermen in this situation, we have nothing more to do than to raise hook to pull out the fish.

After a while the population of carp in the pond will learn to recognize certain signals. At the moment they feel something sharp in her mouth, smarter than them not to panic. Soon they will understand that it is necessary to lift a centimeter and towards your lead and pressure on occasion you will disappear.When your line is not applied, it is much easier for them to escape hook you and this may be just the beginning of many empty runs for a fisherman.

Wizards of the population in the basin could even raise your 120-gram weight to move a meter or two and all this without even hang.

What can we learn from this? What would be the decision then to have normal Run again?

One of the exits in such situations is to increase the weight of the burden. For example, replace 100 with 250 grams ones. This can give you a chance to some extent, creating a moment greater resistance tension of the occasion.

After carp has learned to recognize the tactics you at first sight for him the situation would be the same, but for the most weight will give you an edge at the right time, increasing your chance hook to plunge deep enough into his mouth. That stronger piercing can cause fish to panic again. Again we are winning side. I do not think it is necessary to mention the advantage of a sharp hook in this situation.

Of course, still remains far with zero voltage on occasion you suggesting that more educated will find a way to counters and that your fishing essentials (see http://www.bestfishingessentials.com/). It follows that we must find another solution. We already know that there tension on a portion of your line, it becomes difficult for the fish to get rid of the hook. This is valuable information that we will use.

When I was young and I started practicing sharandzhiystvoto, I visited several times a week a fishing shop in my hometown. You might ask yourself, what was so special this store for me? This shop was led by Johan Jansen and Johann he was and is one of the most thoughtful minds. He still has a huge impact on our way of fishing without most of us even realizing it. After a while some work as a trader Johann create successful private company “Carp Company”, which, I dare say that in those times was at least a decade before other existing baited produced it. As an example of this was that he used L0-30 before many other “gurus” in this area had heard about it. Later he sold his business to a large player in Europe and Karp disappeared from the scene. That was the moment I lost contact with Johan and I dare say that this is a shame because every minute in his company was irreplaceable. He taught me so much in the early days of carp fishing, so I’m sure that if we return to our ranks will be top sharandzhiya again. If my information is correct, Johan now lives in the Ardennes, which are located in Belgium and walk for fish primarily with rods.

Besides bait, Johann was a step forward in the field of installation. However, all its installations remained simple yet sophisticated to the last detail. I guess he was one of the first thinking minds who knew the difference between having a 0% or 100% strain on this occasion and to have consistently overcharged final segment of its line. Many years ago Johann wrote an article on the subject, which later became the foundation of “Wonder rig” by Sven Hyobek. In this assembly line, invented by Sven, e forerunner of the famous Recoil rig or Bungee rig, which is part of the arsenal of many today.

On Bungee rig have been written many articles throughout the European press. I personally promote this installation quite Karp show th in Europe in the last few years and for me personally it is quite simple to do, but the main stories were, how long does it take to be made. For the novice can take up to fifteen minutes. I manage to do it for 5-6 minutes by pulling the hook from the package to the shrinking of shrink tubing to the passage of the elastic bungee hose through swivel and putting the stopper. But believe me, I tied a few hundred such for the past ten years.

Many sharandzhii have a problem with strung on elastic bungee needle and pave the occasion they subsequently through it. The length of this occasion may not be too large compared to the length of the elastic part. What matters is the diameter and cross-section or shape of the fiber itself, because it can deform the final assembly.

Another problem that can occur when you is how to fix the elastic part of both ends. As already mentioned, I have no problems with this installation, but the comments I hear from colleagues who visited me at the stands of European exhibitions is that they have! If there is an appropriate response to the question “How to keep the line loaded prior to the fish caught?”, This may be the answer for many sharandzhii who want to catch a similar installation.

Triggalink Kevin Nash e Reduction A good example of how to achieve this result but it is also much easier to use by all components of Bungy rig. Ease of use is the biggest plus of this product.

How to tie a triggalink rig?

First, do a loop of the hair of the flexible part of the event. I use KNT Armourbraid, but any occasion or knitted inner peelable will do. Then put the stopper . The stopper is placed with cen keep hair at the bottom of the hook. The weight of the ball will make quite powerful and precise teaser for carp. This combination will hinder any fish, try the nipple on your bait and not be caught. Of course, this does not bring you any guarantee that the fish will panic rose in spiking properly. At this stage we are still in the “gray area” where we have impaled carp, trying their best to get rid of the blade in his mouth before he cried out your alarm.

By “node without node” aardvark occasion, starting from the closed part of the ear at the base of the hook. The next step is to use a small piece of heat shrink tubing to make a curve in the line. It is clear that we must hold hook hot steam. Personally, I prefer the old-fashioned tube before modern sized options for this purpose. They restrict me to use what I offer, without being able to achieve the effect you seek.

At the other end of the line tie an oval ring. You can bind directly to the occasion triggalink, but I personally prefer the use of ring because I can use the elastic part more than once with different components. Instead of tying the whole installation again, you change only the other part – quickly and cheaply. The first part of triggalink rig must be no longer than 5 to 6 cm.

Finally we came to the component naming this installation. Now tie triggalink, as illustrated. Fair also with bloodknot, if you prefer this before. Usually I use up to 20 cm triggalink and tie the other end with swivel standard used before the little knot. Triggalink installation that I use, like the one in the photograph 12. finishing detail will hide the ring with some soft lead. Is it necessary? Actually not. Triggalink is sinking material, but little piece burden will contribute to a little more stress on your installation, and for me every detail in this aspect is well doshtal. Perhaps it’s just a kind suggestion to me personally than to help on the technical installation. Logically find application only when you work with pop-up bait.

Picture 14 shows you two almost identical triggalink installation, but out of the water. As soon as triggalink fall into the water, will shrink to 35% of its length. Their diameter will expand, which is normal, provided that have the same amount of material of lesser length.

Picture 17 shows you wet and dry triggalink. Photo 18’ll see triggalink elasticity of the material. As soon as carp suck hook material extends and creates tension because of its elasticity and gravity of lead.

Now there is a situation with zero or 100% strain on occasion you and this will impede fish to recognize the situation. Once keep tensioned fiber carp will escape much more difficult hook you. Obviously, the longer this situation continues, the more nervous it becomes your opponent and this will contribute to its easier panic. After Triggalink his job, he will behave like a normal occasion in fighting the fish.

Sharandzhiite who fall in camouflage occasions can easily colored material with a marker or use mud from the bottom of the lake. Matter will turn perfectly.

To keep the pressure on the rein you in the moment the fish is still not detected, it is the key factor that makes every successful Triggalink or Bungee installation. From these two approaches Triggalink e much easier for tying. However, the choice is yours.

Leave a Reply